1.1.1. Launch of the engine
Launch of the cold engine
1. Install the gear shifting lever in neutral situation and extend the handle of control of the air gate of the carburetor.
2. At very low temperature of air include for several seconds of a headlight for heating of electrolyte in the rechargeable battery and press a coupling pedal.
3. Insert a key into the switch of ignition and include a starter, without pressing at the same time an accelerator pedal. If the engine does not begin to work in the first attempt, switch off ignition and approximately through 30 with repeatedly include a starter. More than on 10 with it is not recommended to include a starter.
4. After launch of the engine release the ignition key which will automatically come back to situation "Ignition".
During the steady operation of the engine after start-up smoothly release a pedal of coupling and gradually, in process of growth of frequency of rotation of a bent shaft, drown the handle of control of the air gate of the carburetor.
After the long parking of the car before launch of the engine it is recommended to pump up fuel in the float-operated camera of the carburetor for what several times press the lever 1 (fig. 1 — 1) manual pumping of fuel.
At a temperature minus 25 °C and below, and also during heavy snowfalls for more intensive warming up of the engine and preservation of its thermal mode the front grille is recommended to be closed a protective apron.
Launch of the hot engine
At the hot engine the handle of management of the air gate of the carburetor has to be drowned. Before launch of the engine smoothly press an accelerator pedal approximately on a third of its course. After start-up as soon as the engine begins to work trouble-free, gradually release a pedal.