5.3.3. Check of technical condition of details

Wash out gasoline or kerosene all details and dry.
Attentively check compliance of details to the following requirements:
— disks of valves of compression and return, and also a plate of the perepuskny valve should not be deformed; not planeness of a plate of the perepuskny valve is allowed no more than 0,05 mm;
— the working surfaces of the piston, a piston ring, the directing plug of a rod, the cylinder and details of valves have to be without zadir and забоин, able to influence normal operation of the shock-absorber;
— springs of valves of return and compression have to be whole and rather elastic;
— disks of the valve of compression have to be whole and not have considerable wear;
— the epiploon is recommended to be replaced at repair new.
Replace all damaged details and start assembly of the shock-absorber.