6. Steering

SURVEY, CHECK AND ADJUSTMENT OF STEERING
 General survey
 Check of spherical hinges of steering drafts
 POSSIBLE MALFUNCTIONS OF STEERING, THEIR REASON AND METHODS OF ELIMINATION
 Check and adjustment of a gap in bearings of a worm of the steering mechanism
 Check and adjustment of a gap in gearing of a roller with a worm of the steering mechanism
STEERING MECHANISM
 Removal and installation
 Dismantling and assembly of a case of steering of the mechanism
 Check and repair
 Dismantling and assembly of the top shaft of steering
DRAFTS AND SPHERICAL HINGES OF THE STEERING DRIVE
 Removal and installation
 Check and repair
ARM OF THE PENDULAR LEVER
 Removal and dismantling
 Check
 Assembly and installation




Fig. 6-1. Steering: 1 — side draft; 2 — a bipod; 3 — average draft; 4 — the pendular lever; 5 — the adjusting coupling; 6 — the lower spherical hinge of a forward suspension bracket; 7 — the right rotary fist; 8 — the top spherical hinge of a forward suspension bracket; 9 — the right lever of a rotary fist; 10 — an arm of the pendular lever; 11 — the bearing of the top shaft of steering; 12, 19 — an arm of fastening of a shaft of steering; 13 — a pipe of an arm of fastening of a shaft of steering; 14 — the top shaft of steering; 15 — a case of the steering mechanism; 16 — an intermediate shaft of steering; 17 — a facing casing of a shaft of steering; 18 — a steering wheel; 20 — the fixing arm front plate; 21 — a coupling bolt of fastening of the cardan hinge; 22 — a body longeron

The device of steering is shown in fig. 6-1