7.9.1. Removal and installation

Install the lever of the drive of the parking brake in extreme lower situation, disconnect the ends of cables from levers of the drive of brake shoes (see. "Back brakes").

Fig. 7-1. Scheme of the brake system: 1 — a brake disk; 2 — a brake pedal; 3 — the vacuum amplifier; 4 — the main cylinder of a hydraulic actuator of brakes; 5 — the pipeline of a contour of the drive of forward brakes; 6 — the protection cover of a forward brake; 7 — a support of a forward brake; 8 — the vacuum pipeline; 9 — a tank of the main cylinder; 10 — the button of the lever of the drive of the parking brake; 11 — the lever of the drive of the parking brake; 12 — draft of a latch of the lever; 13 — a lever latch; 14 — an arm of the lever of the drive of the parking brake; 15 — the returnable lever; 16 — the pipeline of a contour of the drive of back brakes; 17 — a cable cover tip flange; 18 — the wheel cylinder of a back brake; 19 — the regulator of pressure of back brakes; 20 — pressure regulator drive lever; 21 — brake blocks; 22 — the lever of the manual drive of blocks; 23 — draft of the lever of the drive of the regulator of pressure; 24 — an arm of fastening of a tip of a cover of a cable; 25 — a back cable; 26 — a lock-nut; 27 — an adjusting nut; 28 — the plug; 29 — a guide of a back cable; 30 — the directing roller; 31 — a forward cable; 32 — an emphasis of the switch of a control lamp of the parking brake; 33 — the stoplight switch

Fig. 7-21. Details of the drive of the parking brake: 1 — a cover; 2 — a forward cable; 3 — the lever; 4 — the button; 5 — a draft spring; 6 — draft of a latch; 7 — the plug; 8 — a roller; 9 — a guide of a back cable; 10 — the expansion plug; 11 — an ottyazhny spring; 12 — an expansion level; 13 — the lever of the manual drive of blocks; 14 — a back cable; 15 — an arm of fastening of a back cable

Having weakened a lock-nut 26 (see fig. 7-1) and an adjusting nut 27, remove an ottyazhny spring of 11 (fig. 7-21), then completely turn off a lock-nut and a nut.
Disconnect arms of the 15th cable from a body floor and a back tip of a cable from a brake board; remove arms and a back cable.
Shoot a video 8 with the plug 7.
Remove a protective cover of the lever, and then the lever assembled and a forward cable.
Having taken out the forelock and having removed a persistent washer, disconnect a forward cable from the lever of the drive of the emergency brake.
Install the parking brake in the sequence, the return to removal, with the subsequent its adjustment (see. "Adjustment of the parking brake"). At installation grease with jellied LITOL-24 or LSTs-15 lubricant a guide of a back cable, an axis of the lever of the parking brake, the plug of a roller and a tip of a forward cable.