8.4.2.5. Check of the traction relay


Fig. 8-14. Starter 35.3708: 1 — an anchor shaft; 2 — the starter cover plug; 3 — a restrictive ring of the course of a gear wheel; 4 — a drive gear wheel with an internal ring of the obgonny coupling; 5 — a persistent half ring; 6 — a roller of the obgonny coupling; 7 — a casing of the obgonny coupling; 8 — a drive lever axis; 9 — a cap; 10 — draft of an anchor of the relay; 11 — the drive lever; 12 — a cover from the drive; 13 — a returnable spring of an anchor of the relay; 14 — a starter relay anchor; 15 — a forward flange of the relay; 16 — the holding relay winding; 17 — the involving relay winding; 18 — an anchor rod; 19 — the relay core; 20 — a core flange; 21 — a contact plate; 22 — a relay cover; 23 — contact bolts of the relay; 24 — a cover from a collector; 25 — the brush holder of a positive brush; 26 — the starter cover plug; 27 — an adjusting washer of an axial free wheeling of an anchor; 28 — a lock washer; 29 — a coupling bolt; 30 — a casing; 31 — a conclusion of seriyesny coils of a winding of the stator; 32 — a face collector; 33 — the seriyesny coil of a winding of the stator; 34 — a stator pole; 35 — the starter case; 36 — the anchor core; 37 — a restrictive disk; 38 — a flood ring; 39 — a nave with an external ring of the obgonny coupling; 40 — a nave insert

Establish between a restrictive ring 3 (see fig. 8-14) and a gear wheel laying 12,8 mm thick and turn on the relay. Check tension of turning on of the relay which has to be no more than 9 V at the ambient temperature of (20±5) °C. If tension is more, then it indicates malfunction of the relay or drive.