9.1.2. Dismantling of forward doors

When replacing details and mechanisms of a door its dismantling is required.

Fig. 9-2. Type of inside of a door: 1 — the button of blocking of the lock; 2 — a decorative cap; 3 — the armrest handle; 4 — the internal handle of the drive of the lock; 5 — the window regulator handle; 6 — a window cap. Shooters showed an arrangement of holders of an upholstery of a door

Take out a decorative cap of 2 (fig. 9-2) of the handle 3 armrests, turn out the screw of fastening and remove the handle.
Having slightly drowned the socket under facing of the handle 5 of a window regulator, move facing along the handle to an exit from ring bore to axes and remove the handle.

Fig. 9-3. Lock of a forward left door: 1 — the lever of the internal drive of the lock; 2 — a spring of the lever of blocking of the lock; 3 — the lever of the external drive; 4 — draft of the switch of the lock; 5 — draft of the button of blocking of the lock; 6 — a bracket; 7 — the button of blocking of the lock; 8 — a lead of draft of the external drive; 9 — the external handle of the lock; 10 — the lock switch; 11 — a cracker spring; 12 — a clamp cracker; 13 — a lock rotor; 14 — draft of the external drive; 15 — the lock clamp case; 16 — a lock ratchet; 17 — a spring of the central roller; 18 — the roller of switching off of the lock; 19 — the central roller; 20 — the lever of blocking of the lock; 21 — draft of the internal drive of the lock

Remove the button 7 (fig. 9-3) of blocking of the lock, previously sharp tool having removed a cap of the button and having taken out a bracket of the 6th connection with draft 5.
Hook the screw-driver facing of the internal handle of opening of a door and remove facing.
Overcoming resistance of spring plastic holders (in fig. 9-2 are noted by shooters), remove a door upholstery.
Remove lower a sealant of lowering glass.
Turn off a nut, turn out the screw of fastening and take out the forward directing fillet of lowering glass. Turn out screws of fastening of a back fillet of lowering glass and take out it.
Turn out screws of fastening and remove both half of a cap 6 (see fig. 9-2) windows.

Fig. 9-4. Drive of forward lowering glass: 1 – window regulator handle; 2 – facing of the handle of a window regulator; 3 – window regulator handle socket; 4 – window regulator mechanism; 5 – top rollers; 6 – screws of fastening of clamping plates; 7 – clamping plates; 8 – arms of lowering glass; 9 – lowering glass; 10 – cable; 11 – lower roller; 12 – bolt; 13 – tension roller

Weaken a bolt of fastening of a tension roller of 13 (fig. 9-4) of a window regulator, turn out screws 6 of fastening of a cable 10 of arms of the 8th glass and remove a cable from rollers.
Take out at the top lowering glass.
Turn off three nuts of fastening of the mechanism 4 window regulators and take out it.

Fig. 9-5. Fastening of the internal handle of the drive of the lock of a door: 1 — the screw of fastening of the handle; 2 — the internal handle; 3 — a nut of fastening of an axis of a tension roller of a cable of a window regulator

Turn out two screws 1 (fig. 9-5) of fastening of an arm of the internal handle 2 and remove it assembled with an arm, having disconnected draft.
Turn off nuts of fastening of the external handle of the drive of the lock, disconnect draft and remove the handle.

Fig. 9-6. Fastening of the lock of a door: 1 — the button of blocking of the lock; 2 — draft of the button of blocking; 3 — a window regulator cable; 4 — screws of fastening of the lock; 5 — draft of the internal drive of the lock

Turn out screws 4 (fig. 9-6) of fastening of the lock of a door and remove it, previously having disconnected drafts of the button of blocking and the switch of the lock.