9.1.5. Adjustment of size of the course of lowering glass

Fig. 9-7. Adjustment of a tension of a cable of a window regulator and size of the course of back lowering glass: 1 — lowering glass; 2 — the rubber buffer of glass; 3 — the screw of a clamping plate; 4 — a cable of the drive of lowering glass; 5 — a tension roller of adjustment of a tension of a cable

At forward doors remove an upholstery, lower glass against the stop in the rubber buffer and turn out screws 3 (fig. 9-7) of clamping plates of fastening of a cable.
Tighten the window regulator handle before combination of the plug (tag) on a forward vertical branch of a cable with the middle of a forward arm of glass and wrap screws of both clamping plates.
Check smoothness of operation of a window regulator. If necessary adjust a cable tension a tension roller 5.
At back doors remove an upholstery, lower glass and weaken screws of a clamping plate of fastening of a cable.
Lower glass against the stop in the rubber buffer.
Turn the window regulator handle to a limit in the direction of glass lowering, and then half way in the opposite direction. At such provision of glass and cable wrap screws of clamping plates.
Check smoothness of operation of a window regulator. If necessary adjust a cable tension a tension roller.