9.2. Possible malfunctions of a body, their reason and methods of elimination


Cause of defect
Elimination method
The door does not open the external handle
Connection of draft of the external handle with the lever of the external drive of the lock weakened
Tighten the draft fastening screw
The door is not locked
1. Breakage or weakening of a spring
central roller of the lock
1. Replace the lock
2. The rasklepka of an axis of the lever of the external drive of the lock weakened. When closing
tooth of the lever does not enter gearing with
ratchet, owing to the axial shift of the lever
2. Remove the lock and execute a reliable rasklepka of an axis
3. Jamming of the lever of the external drive
about the case because of coking up of lubricant and
raise dust
3. Remove the lock, wash out and grease
TsIATIMV221 or TsIATIMV201 lubricant
The door does not open completely internal handle
The incomplete course of the lever of the internal drive owing to a low speed of draft
Adjust the provision of internal
lock drive handles
The lock of a cowl does not open the handle from salon
1. Break of a cable of the drive of the lock
1. Replace a cable
2. Lock drive cable length is big
2. Adjust cable length due to loopback fastening on a lock hook
The cowl is not locked by the lock
1. Break of a spring of the lock
1. Replace a spring
2. The lock drive cable is shortened
2. Adjust cable length due to loopback fastening on a lock hook
3. Position of the lock on a body is broken
3. Adjust position of the lock
Lowering glass is not fixed in a standard position
1. Fastening of a clamping plate of a cable weakened
1. Fix a clamping plate. Adjust glass movement accuracy
2. Breakage of a brake of the mechanism of a window regulator
2. Replace a window regulator
The back of a front seat does not come back from inclined situation at the lifted adjustment mechanism handle
Break of a spring of the mechanism
Replace a spring, check operation of the mechanism
The back of a front seat is not fixed in a standard position
Breakage of teeths of a clamp of a back
Replace a framework of a seat or, having cut down
the damaged clamp, weld new with the subsequent painting
The warmed-up air constantly comes to salon
1. The heater crane drive is faulty
1. Check a condition of the drive, if necessary adjust management of a heater
2. The crane of a heater does not block a stream
liquids
2. Replace the crane
The air coming to salon is not warmed up
1. The heater crane owing to malfunction of the drive does not open
crane
1. Check a condition of the drive, in case of draft break - replace it
2. The crane is faulty
2. Replace the crane
Poorly air comes to salon
The airinflow cover drive is faulty (the cover is closed)
Check a condition of the drive, in case of draft break - replace it
Water gets into salon
1. The gap on door perimeter is increased
1. Adjust the provision of a door and
lock clamp
2. Tightness of a sealant of a cable of the antenna is broken
2. Seal a sealant with non-drying mastic or replace it
3. The metal framework of a sealant of a door is crumpled
3. Replace a sealant
4. Corrugations on a door sealant
4. Replace a sealant
Water (dust) gets into a luggage carrier
1. Trunk lid shift
1. Adjust its situation
2. Deformation of a trunk lid
2. Align it
3. Defects of a sealant
3. Replace it
Dark stains on all surface of a body
1. Application for a sink of hot water
(over 80 °)
1. Eliminate insignificant damages with polishing, at big damages recolour a body
2. Use of ethylated gasoline or other substances corroding a covering for removal of a wax covering
2. Polish, if necessary recolour a body
Pink spots on the surfaces painted in light color
Hit of cooling liquid
Polish the damaged places
Light spots on the surfaces painted in dark color
Influence of moisture at long storage of the car under an air-tight cover
Polish the damaged places, if necessary recolour a body
Enamel lost initial gloss
Use of dry cleaning material, long influence of the sun, use of the substances corroding a covering at a body sink
Polish the damaged places, if necessary recolour a body
Corrosion of surfaces of a body in the hidden cavities
Untimely processing of hidden
cavities anticorrosive structures
Wash out the hidden cavities and put
anti-corrosive agent, if necessary replace separate elements of a body