9.6.1. Removal and installation

Disconnect a wire "weight" from the rechargeable battery.
Turn out screws of fastening and remove a facing casing of a shaft of steering.

Fig. 9-19. Dashboard and its accessories: 1 — the ashtray case; 2 — a bracket of fastening of the lock of a cover of a ware box; 3 — an ashtray; 4 — the lock of a cover of a ware box; 5 — an insert decorative panels of fastening of the radio receiver; 6 — the panel of fastening of the radio receiver; 7 — an insert of the lower panel of fastening of the radio receiver; 8 — facing of the panel of fastening of the radio receiver; 9 — an insert of the top panel of fastening of the radio receiver; 10 – cap of a board of a symbol of heating of a windshield; 11 — a guard of devices; 12 — facing of a loudspeaker; 13 — the dashboard; 14 — a dashboard insert; 15 — the case of a ware box; 16 — a cover of a ware box; 17 — a link of a loop of a cover of a ware box; 18 — the shelf of the dashboard

Hooking the thin sharp tool, remove nozzles of heating of side glasses from the dashboard, nozzles of ventilation of a body and a cap of 10 (fig. 9-19) of a board of a symbol of heating of a windshield from a guard of 11 devices.
Turn out the screw (it is located under a cap) fastenings of a guard of 11 devices, remove a guard, disconnect plugs and wires from devices.
Remove facings 12 from the left and right loudspeakers, overcoming resistance of two holders located on the upper edge of facings.
Turn out four screws of fastening of loudspeakers, take out them from the dashboard and disconnect wires.
Remove to a regiment 18 and the case 15 of a ware box, having turned out screws of their fastening.
Turn off a nut of the daily counter of a speedometer and take out a counter cable from the dashboard.
Take out the electric clock, the lighter and switches of lighting and heating of back glass from the panel 6 of fastening of the radio receiver. Disconnect from them wires.
Having turned out fastening screws, remove the radio receiver and disconnect wires.
Take out for the top part the lower insert 7 panels of fastening of the radio receiver.
Wringing out from the left and right side of edge of the panel 6 of fastening of the radio receiver, release hooks of the top insert 9 and take out it from the panel.
Remove a decorative insert 5 panels of fastening of the radio receiver, having wrung out two hooks in the top part of an insert from within.
Turn out six screws of the panel 6 of fastening of the radio receiver (including two screws fixing at the same time and the dashboard) and remove the panel 6.

Fig. 9-20. Points of fastening of the dashboard. Shooters showed fastening points

Through apertures of a guard of 11 devices and a ware box turn off four nuts of the top fastening (fig. 9-20) of the dashboard, and also two remained the screw of the lower fastening, remove the panel and an insert of the panel.
Carry out installation of the dashboard upside-down.