9.7.2. Dismantling and assembly of mechanisms of adjustment of front seats

Carry out dismantling and assembly of mechanisms on the removed seats.

Fig. 9-22. Mechanisms of adjustments of a front seat: 1 — guides of a sled; 2 — rams of a sled; 3 — a roller; 4 — a rubber ring of a roller; 5 — the limiter; 6 — a latch of a sled; 7 — a clamp of an internal guide of a sled; 8 — the amplifier of a back; 9 — draft; 10 — a spring; 11 — the forelock; 12 — screw draft with the back inclination mechanism handle; 13 — the handle of a latch of the mechanism of movement of a sled; 14 — an arm of screw draft

Disconnect a spring of 10 (fig. 9-22) and beat out a finger of draft 9. Turn out bolts of fastening of a sled to a seat and remove them. Take out the forelock 11 and screw draft 12 of an arm 14. Shifting rams 2 on guides 1, take out rollers 3 and the limiter 5, remove rams from guides.
Carry out assembly upside-down.