9.8.1. Removal and installation of a heater

Disconnect a wire "weight" from the rechargeable battery.
Remove a guard of devices, the case of a ware box and the panel of fastening of the radio receiver (see. "Dashboard").
Translate to the full to the right a control lever the crane of a heater and merge liquid from the engine cooling system.

Fig. 9-23. Heater and ventilation of a body: 1 — the lever of an airdistributing cover; 2 — an arm of control levers; 3 — handles of control levers a heater; 4 — the air duct of heating of side glass; 5 — flexible drafts; 6 — the air duct of heating of a windshield; 7 — a nozzle of ventilation of a body; 8 — the nozzle lever; 9 — nozzle shovels; 10 — a nozzle gate drive cogwheel; 11 — the airinflow pipe valve; 12 — an airinflow pipe; 13 — the gate of a nozzle of ventilation of a body; 14 — the case of a nozzle of ventilation of a body; 15 — a coupling collar; 16 — rubber hoses; 17 — a sealant of branch pipes; 18 — a sealant of a nozzle of heating of side glass; 19 — a nozzle of heating of side glass

Weaken coupling collars of 15 (fig. 9-23) and disconnect from heater branch pipes rubber hoses 16 for a supply and removal of liquid.
Remove a sealant 17, having turned out two bolts of fastening in an engine compartment.
Turn out two bolts of fastening of an arm of 2 control levers a heater, weaken bolts of brackets of fastening of covers of flexible drafts 5 on an arm, disconnect drafts and remove an arm.
Overcoming resistance of latches of the case of a nozzle of the 19th heating of side glasses, remove the left and right nozzles.
Turn off a nut of fastening of the right air duct 4 heatings of side glass, wring out latches of the case of the gate and remove the air duct. Similarly remove also the left air duct.
Remove four spring holder and a casing of the fan of a heater assembled.
Turn off four nuts of fastening of a casing of a radiator, disconnect a wire "weight" under one of nuts on the left side and remove a casing.
Remove the air duct 6 of heating of a windshield.
You make installation of a heater upside-down. Pay attention to correctness of installation of sealing laying between a casing of a radiator and a body. At assembly and installation of a heater adjust management of a heater (see "adjustment of management of a heater").
After installation of a heater on the car and connections of hoses fill the engine cooling system with cooling liquid and check tightness of connections of a heater.